Free Torque Converter
Convert between newton-metres, pound-feet, pound-inches and kilogram-force metres.
What is the Torque Converter?
Convert between newton-metres, pound-feet, pound-inches and kilogram-force metres.
Enter a torque value and pick the units; the tool converts at once. It relies on the exact standard gravity of 9.80665 m/s2, so 1 kgf-m = 9.80665 N-m.
Quick, reliable engineering arithmetic saves time on site and in the workshop. These tools show their working so you can check the result.
How to use the Torque Converter
Using the torque converter takes a minute or two. Your entries are saved in this browser, so you can come back later and carry on.
Step 1
Enter your values, choosing the units you are working in.
Step 2
Read the result and the supporting numbers shown beneath it.
Step 3
Check the result against a second method or a reference table before you rely on it.
Tips for better results
Check the unit on a torque wrench before tightening, because a mix-up between lb-ft and lb-in is a factor of twelve.
Keep units consistent from start to finish.
These tools are for estimates. Safety critical designs need a qualified engineer.
Privacy and where your data goes
Everything you type into the torque converter stays on your own device. Zapxa does not receive your numbers or documents. If you clear your browser data, your saved entries will be removed, so download a PDF of anything you want to keep.
Frequently asked questions
How many pound-inches are in a pound-foot?
12, because a foot is 12 inches.
Is torque the same as energy?
They share dimensions, but torque is a force applied at a distance and is not measured in joules.
Is the torque converter free?
Yes. It is free to use with no signup, no watermark and no usage limits.
Is my data private?
Yes. Your inputs are processed in your browser and saved only in its local storage. They are not uploaded to our servers.
Does it work on mobile?
Yes. Zapxa works on phones, tablets and desktops. Use the print button or download a PDF to keep a copy.
Related Engineering tools
- Ohm's Law Calculator — Solve for voltage, current, resistance and power from any two known values.
- Resistor Color Code Calculator — Convert a resistance value to 4-band colour code, or bands back to ohms.
- LED Resistor Calculator — Find the series resistor an LED needs from supply voltage, forward voltage and current.
- Voltage Drop Calculator — Calculate voltage drop and power loss along a copper or aluminium cable run.
- Electricity Cost Calculator — Estimate the daily, monthly and yearly electricity cost of running a device.
- Battery Runtime Calculator — Estimate how long a battery will power a load, allowing for depth of discharge and efficiency.